|
|
With the SDM-73 you are able to diagnose the bearing condition, even long before wear-induced vibration becomes detectable, by measuring the amount of steel dust in oil around the bearing.
Within 3 seconds the meter gives you a readout of the ferro magnetics particles in the oil in parts per million ppm. No need to send your sample to a laboratory for analyses any longer. You now get on the spot direct measurement.
The meter can be used in any rotating equipment application such as robots, wind turbines, elevators etc. etc. Preventive maintenance is key for increase in uptime of your equipment. |
- Able to diagnose the bearing condition, even long before wear-induced vibration becomes detectable, by measuring the amount of steel dust in the oil around the bearing.
- Simple operation – simply measured by an oil sample
- 2ml Syringe with cap SMC-2-10 (10pcs)
- Oil Sampling Nozzle, SMC-2Z-5 (5pcs)
- Carrying Case – Leather – for SDM-72/73
| Model | SDM-73 |
|---|---|
| Measurement Principle | Magnetic balance type electromagnetic industion method |
| Substance Measured | Steel dust concentration in lubricating oil |
| Measurement Range | 0 to 19999wt ppm |
| Minimum Resolusion | 1wt ppm |
| Zero adjustment | Automatic adjustment |
| Amount of sample | 1.5ml |
| Power Source | 4 x AA (R6) alkaline drycells |
| Battery Life*1 | Up to 30 hours by alkaline cells |
| Operating temperature | 0 to 40 °C |
| Dimensions | W84 x H190 x D40 mm |
| Weight | Approx. 500g (including batteries) |
| Standard Accessories | Carrying case, 2ml syringe (5 pieces), oil sampling nozzle (2 pieces), syringe holder and 4 x AA (R6) alkaline drycells |
*1 It may vary based on the environmental conditions, operating conditions, strage time, battery manufacturer, etc.
CE Declaration of Conformity
