|
With the SDM-72 you are able to diagnose the bearing condition, even long before wear-induced vibration becomes detectable, by measuring the amount of steel dust in the grease around the bearing.
Within 3 seconds the meter gives you a readout of the ferro magnetics particles in the grease as percentage of the weight. No need to send your sample to a laboratory for analyses any longer. You now get on the spot direct measurement.
The meter can be used in any rotating equipment application such as robots, wind turbines, elevators etc. etc. Preventive maintenance is key for increase in uptime of your equipment. |
- Able to diagnose the bearing condition, even long before wear-induced vibration becomes detectable, by measuring the amount of steel dust in the grease around the bearing.
- Simple operation – simply measured by a grease sample
- Grease Sampling Case, SMC-01-G (10pcs)
- Sample Spatula, model P-1 for SDM-72
- Carrying Case – Leather – for SDM-72/73
| Model | SDM-72 |
|---|---|
| Measurement Principle | Magnetic balance type electromagnetic method |
| Substance Measured | Steel dust concentration in grease |
| Measurement Range | 0 to 5.000 %Wt |
| Minimum Resolusion | 0.001 %Wt |
| Zero adjustment | Automatic adjustment |
| Amount of sample | Approx. 0.8ml |
| Power Source | 4 x AA (R6) alkaline drycells |
| Battery Life*1 | Up to 30 hours by alkaline cells |
| Operating temperature | 0 to +40 °C |
| Dimensions | W84 x H190 x D40 mm |
| Weight | Approx. 500g (including batteries) |
| Standard Accessories | Carrying case, grease sampling spatula, grease sample case (10 pieces) and 4 x AA (R6) alkaline drycells |
*1 It may vary based on the environmental conditions, operating conditions, strage time, battery manufacturer, etc.
CE Declaration of Conformity
